1000W Power Inverter with Digital Display for Blenders,vacuums, Power Tools

1000W Inverter with digital display
1000W inverter can provide a 1000w continous/ 2000W peak AC output . It feasure with a smart cooling fan and digital dispaly . With2 USB port and1000W continous power from 2 AC charging port , Most of your charging need can be satisified .The application of cooling fan , internal fuse, ground wire and digital light alarm&circuit shut down protection form multiple protections to ensure your device work safely . perfectly suit your camping, outdoor activities, vacations, road trips.

Digital light display

When the inverter work normally , the digital light will show battery input voltage , inverter output voltage and inverter output wattage by pressing but not hold on the “on /off ” button .When the inverter work under overload,overheat,input low voltage,input high voltage and short circuit, The digital light will shows different signals respectivly to show alarm .”H,P ; Hob ;Lob; H,b ; SC”,  At the same time , The audio alarm will sound .

How to use the digital light

1:Press and hold the ON/OFF button for 3 seconds to turn the inverter on,W-LED will glow and digital display will show”0” along with a brief “beep"
2:Press but not hold ON/OFF button to change the digital display to INPUT/OUTPUT voltage
3:Press and hold the ON/OFF button for 3 seconds to turn the inverter off.

Efficent cooling Fan

Fans start working when temperature of heat sink reaches 104℉; High-speed cooling fans help to dissipate heat and keeps the inverter running safely and effectively at a low temperature.

    Nominal input voltage   12.8-13.2 VDC
    Nominal output voltage  115±10% VAC
    Output frequency  60±2 Hz
    Operating input voltage 10.0-15.0 VDC
    Continuous output power Up to 1000 W
    Surge output power  2000 W
    Waveform Modified sine wave
    Efficiency (typical) 86%
    Typical No Load Current (at nominal input voltage)  0.3 ADC
    Input overvoltage shutdown  15.5±0.5 VDC
    Input undervoltage alarm  10.5±0.5 VDC
    Input low voltage shutdown  10.0±0.5 VDC
    Output power overload shutdown level  1100±100 W
    AC charging port : two
    USB port: two, 5V 2A

    • Note:

    • 1.Please do not leave the power inverter in the ON position while your car is off.2.Disconnect the positive battery terminal before doing any wiring to the inverter.3.Keep the unit away from water and flammable material or in any location which may accumulate flammable fumes or gases. 4.To reduce risk of electric shock, unplug unit from outlet before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.5.The inverter draws low amperage from the battery with the main ON/OFF switch turned on and no load connected. To prevent battery discharge,turn the inverter off when you are not using it.6.Only connect the power inverter to a 12V battery or power supply. 7.Do not let the inverter into sunlight directly, keep it in cool environment.8.Don’t use the inverter with a product that draws a higher wattage the inverter can provide,as this may cause damage to the inverter and product.

    1 条评论:

    1. There are a bunch of us at the RV resort, where we spend the winter, that own UTVs for riding in the desert. At Christmas we decorate our machines with lights, in my case, a lot of lights. Needed a good high output inverter that could handle the large number of lights and this Potek 500 did that with ease. I really came to appreciate the meter(s) that would show me the inverter's output and the input/output of the battery. Very easy to see exactly what is happening and there is even a fail over system to shut the inverter down should the battery's voltage fall to an unsafe level. Makes it very easy to set up a load that is easily supported and should something happen to the vehicle's charging system, would shut down the inverter's load on the battery. Would I buy it again? You bet.